A tried-and-tested combination of gearmotor and digital frequency inverter
![]() |
MOVIMOT® gearmotor with integrated frequency inverter
|
MOVIMOT®, the gearmotor with an integrated frequency inverter, is a tried-and-tested combination of gearmotor and digital frequency inverter in the 0.5 to 5.4 HP power range. Despite the integrated frequency inverter, MOVIMOT®requires only slightly more installation space than standard gearmotors and can, of course, be supplied in all standard versions and mounting positions, with and without a brake, for supply voltages of 380 to 500 V and 200 to 240 V. The gearmotors have IP54 enclosure as standard, but the MOVIMOT® gearmotor is also available with IP55, IP65 and IP66 enclosures on request. This gearmotor is a heavy-duty and compact version for a number of decentralized drive solutions. SEW-EURODRIVE offers a SafetyDrive package for this application to fit plants in compliance with safety category 3 of EN 954-1.
NEW: MOVIMOT® in combination with the new DR motor series in diverse efficiency versions
|
Technical data
|
|||||
---|---|---|---|---|---|
Speed range [rpm]
|
Voltage [V]
|
Connection
|
Approval
|
Power [kW] (HP)
|
Torque [Nm] (lb-in)
|
280 to 1400 (1700)
|
3 x 380 to 500 (460)
|
Star
|
IEC or cULus
|
0.37 to 4.0 (0.5 to 5.4)
|
2.52 to 27.5 (18.4 to 199)
|
290 to 2900
|
Delta
|
0.55 to 4.0 (0.75 to 5.4)
|
1.81 to 13.2 (16.0 to 87.4)
|
||
280 to 1700
|
3 x 200 to 240 (230)
|
Star-Star
|
0.37 to 2.2 (0.5 to 3.0)
|
2.08 to 12.4 (18.4 to 109)
|
|
MOVIMOT® options
|
||
---|---|---|
Brake control
BEM/BES/URM
|
![]() |
MOVIMOT® can be equipped with a BEM, BES or URM brake control system as an option in conjunction with a modular terminal box. The option is integrated in the MOVIMOT® terminal box. BEM controls the standard brake, BES controls the DC 24 V brake. URM is a voltage relay for controlling brakes.
|
Braking resistor
BW100… / BW200…
|
![]() |
The BW100…/BW200… braking resistors in IP65 enclosure convert the MOVIMOT® drive’s regenerative energy of up to 100 W/200 W (0.134 hp / 0.268 hp) continuous power into heat.
|
Braking resistor
BW150… / BW068…
|
![]() |
The BW150…/BW068.. braking resistors in IP66 enclosure convert the MOVIMOT® drive’s regenerative energy of up to 600 W/1200 W (0.805 hp /1.609 hp) continuous power into heat.
|
DC 24 V power supply MLU11A
|
![]() |
The optional DC 24 V power supply MLU11A is mounted in one of the MOVIMOT® cable entry openings and allows for operation of one MOVIMOT® including an option with a current consumption of up to 70 mA (MBG11A, MWA21A) without an external 24 V auxiliary power supply.
|
DC 24 V power supply MLU13A
|
![]() |
The optional integrated DC 24 V power supply MLU13A is mounted in the MOVIMOT® terminal box and allows for operation of one MOVIMOT®including an option with a current consumption of up to 70 mA (MBG11A, MWA21A) without an external 24V auxiliary power supply.
|
MLG setpoint control module
|
![]() |
The optional MLG..A setpoint generator is mounted in one of the cable entry openings of MOVIMOT®and offers the possibility of adjusting the input speed in the range of -100% to +100 % fmax(potentiometer f1) as well as of powering the inverter with the DC 24 V auxiliary voltage.
|
MBG11A setpoint control module
|
![]() |
The optional MBG11A setpoint control module has two keys and a display. MBG11A.. makes it possible to adjust the speed remotely in the range from -100% to +100% fmax (potentiometer f1). Up to 31 MOVIMOT® units can be controlled at the same time.
|
MWA21A setpoint converter
|
![]() |
The optional MWA21A setpoint converter converts an analog setpoint and the control signals into an RS-485 protocol. The MWA21A enables the MOVIMOT® to be controlled remotely from the control cabinet. Up to 31 MOVIMOT® units can be controlled at the same time.
|
DBG60B keypad
|
![]() |
The DBG60B keypad can be used to control MOVIMOT® drives with integrated AS interface in manual mode. Furthermore, important information can be displayed in monitor mode.
The DBG60B keypad is connected to the diagnostic interface in the MOVIMOT® terminal box.
|
MDG11A diagnostic unit
|
![]() |
The optional MDG11A diagnostic unit indicates the operating status, output current, terminal status and MOVIMOT® fault codes when faults occur.
|
MNF11A line filter
|
![]() |
The MNF11A integrated line filter option is mounted in the MOVIMOT® terminal box and allows for a drive system that complies with the emitted interference stipulated in EN 61800-3 as well as with the class B limit according to EN 55011 and EN 55014.
|
P2.A mount for mounting near motor
|
![]() |
The P2.A mounting plate option allows the MOVIMOT® inverter to be mounted away from the motor (offset). The inverter is connected to the motor using a pre-fabricated hybrid cable. MOVIMOT® with option P2.A is supplied in enclosure IP65.
|